Architects & Engineers
- Fire Rated – Class A
- Quality Assured
- Company Innovation
- Easy Installation
- 20 years Australian Ind. Leader
Part of your solution for your wildfire protection against ember attack and radiant heat.
Stainless Steel Bushfire Mesh protects homes, buildings & infrastructure in wildfire prone areas against ember attack and radiant heat.
Bushfire Mesh is an approved UWI (Urban Wildland Interface) Building Material by independent Fire Authorities. Bushfire Mesh has been tested to UL 723 / ASTM E 84 Surface Burning Characteristics of Building Materials and meets a Class A fire rated building material classification.
Bushfire Mesh is a versatile product, not a system and therefore can be fully customized, to best meet the requirements of customers unique applications. SSWM has a strong focus on our independent testing program and we take the learnings from past bushfire events to ensure that our products can withstand Australia’s harsh environment. We are now sharing and adopting our knowledge to help protect US families and communities.
Over 80% of houses lost to fire is due to ember attack, embers can travel up to 24 miles in front of the fire. Bushfire Mesh can prevent ember attack and radiant heat exposure to homes and can create valuable time when dealing with extreme fire conditions.
Bushfire Mesh can be integrated into new build designs or retrofitted to meet code and harden a home or building. The black powder coated product is aesthetically pleasing against any application as the black absorbs light and will not tea stain. The black coating allows visibility through whilst also providing privacy, as the black absorbs light.
Bushfire Mesh is a versatile product that’s available in different sizes to meet your protection needs. The product is easy to handle and install and therefore can be utilized in a variety of applications.
Class A Fire Rated Building Material
Bushfire Mesh has been tested to UL 723 / ASTM E 84 Surface Burning Characteristics of Building Materials and meets a Class A fire rated building material classification.
Where Building Codes, Federal Emergency Management Agency (FEMA), National Fire Protection Agency (NFPA) / Firewise, CAL FIRE and International Wildland Urban Interface Code (IWUIC) suggest mesh for an application, Bushfire Mesh satisfies these requirements.
In Australia, Bushfire Mesh has been independently tested by CSIRO (NIST equivalent) and meets the physical properties of the Australian Standards 3959, Construction of Buildings in Bushfire Prone Areas.
Defensible Space & Perimeter Ember Fence
Fire authorities will prioritize protecting lives and homes, best practices for owners is to create a defensive environment which provides buildings and infrastructure the greatest chance of protection. Bushfire Mesh Perimeter Ember Fencing is attached to the external perimeter fence of a building or assets perimeter fencing. The perimeter ember fence will allow the fence line to become the first line of defense for the defensible space. The perimeter ember fence will catch the fire front embers blown along the ground. Bushfire Mesh is tested and shown to create valuable time against a wildfire.
Design & Installation
– Can be retrofitted to existing properties
– Installation is simple and quick
– Can be cut & shaped with simple hand tools
– Mesh comes in different widths & lengths and allows customization to protect your space
Before commencing your installation, you should consult with the NFPA / Firewise, State or Local Fire Authority home hardening guidelines or a Wildfire Home Assessment specialist.
Bushfire Mesh Applications
- Creation of defensible space
- Protecting assets where people with limited mobility may occupy
- Protecting assets that have high risk material storage (propane gas & heating oil)
- Protecting critical infrastructure that is expensive to replace (telecommunications)
- Strengthening your Emergency Management Plans (EMP)
- Fortifying your Shelter in Place (SIP)
Testing / Standards
Bushfire Mesh has undertaken extensive testing in both Australia and the U.S. and meets U.S. building code requirements. Refer to the Testing / Standard Tab below.
Bushfire Mesh is easy and quick to install. A perfect product for DIY or installed through a contractor.
Care & Maintenance
Stainless steel is a low maintenance material, simple cleaning is recommended to prevent the build-up of contaminants such as dirt and salt. Refer to our CARE page for further information.
Customized Orders to Your Door
Bushfire Mesh is available in a range of widths and lengths that will be dropped shipped to your home or warehouse.
NEW US BUSHFIREMESH TABLE
|wdt_ID||PRODUCT NAME||PARENT CODE||Product Image||APERTURE MM||WIRE DIAMETER MM||GRADE||APPROX % OPEN*||TECHNICAL DATA SHEET||REQUEST A QUOTE||Variants|
|1||Bushfire Mesh TOUGH||USSWOB 00657||0.0657”||0.0177” (26 SWG)||316||62||Quote||
SSWM’s Bushfire Mesh range is a versatile product, not a system and therefore can be fully customized, to best meet the requirements of customers unique applications. SSWM has a strong focus on our independent testing program and we take the learnings from past bushfire events to ensure that our products can withstand Australia’s harsh environment. We are now sharing and adopting our knowledge to help protect US families and communities.
SURFACE BURNING CHARACTERISTICS OF BUILDING MATERIALS
- Meets a Class A Fire-Rated Building Material classification
– Flame Spread Index 0-200 (10)
– Smoke Development Index 0-450 (160)
CONSTRUCTION OF BUILDINGS IN BUSHFIRE PRONE AREAS
Rev B Independently tested by CSIRO
- Meets the physical properties of the standard
– Aperture < 2mm
– Corrosion Resistant
– Non Combustible
- BAL 12.5 – FZ
Can be used to meet the requirements of the standard where mesh is referenced and if the prescribed construction requirements are met
CORROSION and RELATED PROPERTY TESTS – NEUTRAL SALT SPRAY TEST
- 1000 Hours, No corrosion
Bushfire Mesh meets the UL 723 / ASTM E84 requirements of a Class A Fire Rated Building Product. It satisfies NFPA, Cal Fire, FEMA and ICC UWI Code where Mesh is suggested as an application. While also meeting the Building Codes of Australian Regulations 158 and the latest Australian Standards 3959 – The Construction of Building in Bushfire Prone Areas. It also satisfies the State Fire Authorities in Australia.
Our product development is a collaborative approach encompassing testing, quality and innovation to provide Australian designed, tested and proven Bushfire Mesh.
OF TESTING MATERIALS)
STANDARD SPECIFICATION FOR STAINLESS STEEL WIRE
STANDARD SPECIFICATION FOR INDUSTRIAL WIRE CLOTH
- Manufactured to above listed standards
SIMULTANEOUS DETERMINATION OF IGNITABILITY,FLAME PROPAGATION, HEAT RELEASE AND SMOKE RELEASE
SIMULTANEOUS DETERMINATION OF IGNITABILITY, FLAME PROPAGATION, HEAT RELEASE AND SMOKE RELEASE
- Ignitability Index (0-20) 0
Speed of Flame Index (0-10) 0
Heat Evolved Index (0-10) 0
Smoke Developed Index (0-10)00-1
- Fire Protection Auth
- University Southern QLD
- CFA Victoria
Sorry, There are no related posts here.
Woven Mesh Calculations
- Mesh Count
- Wire Diam mm
- Aperture mm
- Open Area %
- Weight Squ m
- Micron (if Aperture =< 1)